Photo isomerization of cis-cyclooctene to trans-cyclooctene: Integration of a micro-flow reactor and separation by specific adsorption

Liquid-phase adsorption has hardly been established in micro-flow, although this constitutes an industrially vital method for product separation. A micro-flow UV-photo isomerization process converts cis-cyclooctene partly into trans-cyclooctene, leaving an isomeric mixture. Trans-cyclooctene adsorption and thus separation was achieved in a fixed-bed micro-flow reactor, packed with AgNO₃/SiO₂ powder, while the cis-isomer stays in the flow. The closed-loop recycling-flow has been presented as systemic approach to enrich the trans-cyclooctene from its cis-isomer. In-flow adsorption in recycling-mode has hardly been reported so that a full theoretical study has been conducted. This insight is used to evaluate three process design options to reach an optimum yield of trans-cyclooctene. These differ firstly in the variation of the individual residence times in the reactor and separator, the additional process option of refreshing the adsorption column under use, and the periodicity of the recycle flow.     

Effect of aluminium acetyl acetonate on the hydrogen and nitrogen permeation of carbon molecular sieves membranes

With a growing interest in hydrogen as energy carrier, the efficient purification of hydrogen from gaseous mixtures is very important. This paper addresses the separation of hydrogen using Carbon Molecular Sieves Membranes (CMSM), which show an attractive combination of high permeability, selectivity and stability. Supported CMSM containing various amounts of aluminium have been prepared from novolac and aluminium acetyl acetonate (Al(acac)₃) as carbon and alumina precursors. The thickness of the CMSM layers depend on the content of Al(acac)₃ in the dipping solution, which also has influence in the pore size and pore size distribution of the membranes. The permeation properties of the membranes against the Al content in the membrane follows a volcano shape, where the membrane containing 4 wt (%) of Al(acac)₃ has the best properties and was stable during 720 h for hydrogen at 150 °C and 6 bar pressure difference. All the CMSM have permeation properties well above the Robeson Upper limit.     

The effects of washing a collagen sample prior to TEM examination

Transmission electron microscopy (TEM) is an important analysis technique to visualize (bio)macromolecules and their assemblies, including collagen fibers. Many protocols for TEM sample preparation of collagen involve one or more washing steps to remove excess salts from the dispersion that could hamper analysis when dried on a TEM grid. Such protocols are not standardized and washing times as well as washing solvents vary from procedure to procedure, with each research group typically having their own protocol. Here, we investigate the influence of washing with water, ethanol, but also methanol and 2-propanol, for both mineralized and unmineralized collagen samples via a protocol based on centrifugation. Washing with water maintains the hydrated collagen structure and the characteristic banding pattern can be clearly observed. Conversely, washing with ethanol results in dehydration of the fibrils, often leading to aggregation of the fibers and a less obvious banding pattern, already within 1 min of ethanol exposure. As we show, this process is fully reversible. Similar observations were made for methanol and propanol. Based on these results, a standardized washing protocol for collagenous samples is proposed.     

Design and validation of robotic bionic eye with multiple flexible ropes parallel mechanism inspired by oculomotor law

Producing a stable and agile bionic eye for visual image acquisition in robotics is a challenging task. In this paper, we design a bionic eye with mirror-symmetric distribution and cross-connection of flexible ropes. This mechanism is based on oculomotor law and the physiological structure of the extraocular muscles (EOMs). Specifically, the basic structural parameters are determined by Listing’s law, and the unique connection of the flexible ropes can realize the functions of the recti and oblique muscles. Furthermore, to mimic the trochlea structure, a pulley mechanism is constructed to permit the free movement of the flexible ropes. Through simulation and physical experiments, it is demonstrated that the bionic eye mechanism can move with agility under the structural parameters. The experimental results indicate that the proposed bionic eye mechanism has a superior motion accuracy of 2.798 mm, which is 6.7% of the maximum motion distance, and the repeatable accuracy of the mechanism can up to 0.210 mm.     

A Practical Approach to Representation of Real-time Building Control Applications in Simulation

Machine Intelligence Research - Computer based automation and control systems are becoming increasingly important in smart sustainable buildings, of- ten referred to as automated buildings (ABs),...     

Yield stress distribution in injection‐moulded glassy polymers

A methodology for structural analysis simulations is presented that incorporates the distribution of mechanical properties along the geometrical dimensions of injection‐moulded amorphous polymer products. It is based on a previously developed modelling approach, where the thermomechanical history experienced during processing was used to determine the yield stress at the end of an injection‐moulding cycle. Comparison between experimental data and simulation results showed an excellent quantitative agreement, both for short‐term tensile tests as well as long‐term creep experiments over a range of strain rates, applied stresses, and testing temperatures. Changes in mould temperature and component wall thickness, which directly affect the cooling profiles and, hence, the mechanical properties, were well captured by the methodology presented. Furthermore, it turns out that the distribution of the yield stress along a tensile bar is one of the triggers for the onset of the (strong) localization generally observed in experiments. © 2015 Society of Chemical Industry     

Material-point erosion simulation of dynamic fragmentation of metals

We present a validation assessment of the eigenerosion scheme applied in conjunction with the Optimal Transportation Meshfree (OTM) method. The assessment is based on the detonation-driven 304L steel spherical-cap fragmentation experiments of Campbell et al. (2007). Metrics used for purposes of validation include the velocity history of a witness point of the shell and the histogram of recovered fragment sizes. The results of the simulations are found to be in overall good agreement with the experimental measurements, especially when allowances are made for uncertainties in the characterization of the drive and material properties. The ability of the approach to predictively simulate exceedingly complex patterns of fracture and fragmentation under severe conditions of loading and material behavior is remarkable, especially in consideration of the simplicity of the fracture model and its implementation.     

Improved reliability of large-sized a-Si thin-film-transistor by back channel treatment in H2

A hydrogen plasma treatment on the back-channel region of large-sized amorphous silicon thin film transistor (a-Si TFT) with high RF power and optimal process time of 20 s is proposed in this work to effectively reduce off current (I_off) and threshold voltage (V_th) shift under high and low electrical-field stresses. The channel width (W) of large-sized a-Si TFT is ranged from 1000 to 10,000 μm, which are comparable to the realistic TFTs used in the gate driver on array (GOA) of display. It is experimentally found that the mechanism of V_th shift (ΔV_th) after high electrical stress is dominated by the defect generation in a-Si layer rather than charge trapping in the gate insulator (GI) layer, which is different from the observation in previous literatures. It could be due to the effects of back-channel treatment (BCT). In addition, after low electrical stresses, the mechanism of ΔV_th is dominated by defect generation in a-Si layer, which is consistent with previous reports.